Commercial epoxy flooring warehouse high gloss Melbourne

Concrete Resurfacing Services

Repair and renew worn, cracked or stained concrete without the cost and downtime of a full slab replacement.

From $45/m² · Free Inspection

Professional concrete resurfacing across Melbourne

Concrete resurfacing repairs, refreshes and strengthens worn or damaged concrete — a practical, cost-effective alternative to replacing the slab. It is the right call when the base concrete is structurally sound but the top surface has had enough.

Our resurfacing systems bond strongly to existing concrete, covering minor cracks, chips, stains and surface irregularities to create a smooth, uniform finish. That improves appearance while genuinely increasing surface durability. Whether your concrete is cracked, uneven, weathered or heavily stained, we prepare, repair and overlay it properly — and the renewed surface can then be sealed or coated for even longer service life.

Free on-site inspection and fixed written quote
5–10 year warranty on completed work
Fully insured, trained installation crew
Dust-extracted grinding and a clean site at handover

Request a Quote Check Your Suburb

Large warehouse epoxy floor under skylights

From $45/m² Indicative pricing

What's Included

What you get with concrete resurfacing

Specification detail that separates a floor built to last from one that looks fine for a season.

Cheaper than replacement

No demolition, no spoil removal, no re-pour, far less downtime.

Bonded overlay

Resurfacing compounds that key into the existing slab rather than delaminate.

Cracks and chips repaired

Structural crack filling and patching before the overlay goes down.

Coating-ready result

Finish it as-is, or take it straight into an epoxy or flake system.

Our Process

How the installation runs

Four clear stages, so you always know what is happening on your floor and when.

Surface Evaluation

Inspecting slab condition and identifying repair needs.

Cleaning & Repairs

Grinding, crack filling and full preparation.

Resurfacing Overlay

Applying the bonded resurfacing layer.

Finish & Seal

Final texture, curing and protective coat.

Common Questions

Concrete Resurfacing FAQs

Still unsure? Call 0451 980 606 and we will talk it through.

Can epoxy flooring be installed over old concrete?

Yes. Old concrete is fine once it has been properly ground back, cracks have been repaired and moisture has been checked. Preparation is what makes it work — the age of the slab matters far less than its condition and how well it is prepared.

Do you provide concrete resurfacing services?

Yes. We provide professional concrete resurfacing for damaged and uneven concrete, either as a finished result or as preparation before an epoxy flooring installation.

Do you provide concrete sealing services?

Yes. We apply concrete sealers to protect surfaces from stains, moisture and long-term damage, with matte, satin or enhanced-finish options.

How much does epoxy flooring cost in Melbourne?

Epoxy flooring in Melbourne typically ranges from $55–$85 per square metre for a standard system, with flake systems from $65–$85/m² and metallic finishes from $100–$150/m². Large commercial areas over 500m² attract volume pricing from $30/m². The final figure depends on floor size, concrete condition and the preparation required — which is why every quote follows a free on-site inspection.

How long does epoxy flooring last?

A professionally installed epoxy floor lasts 10–20 years depending on traffic, maintenance and the system installed. The single biggest factor is surface preparation: a floor that was properly diamond-ground will outlast an acid-etched or unprepared one many times over.