Fencing Services in Melbourne — Supply & Installation

Timber, Colorbond and boundary fencing installed across Melbourne — set properly, lined straight and built to last.

Free on-site quote · Free Inspection

Professional fencing across Melbourne

GoPoxy installs timber, Colorbond and boundary fencing across Melbourne for homeowners, builders and commercial sites. Replacement fencing, new boundaries and gates.

A fence is only as good as its posts. Most failed fences in Melbourne did not fail at the palings — they failed because posts were set shallow, concreted badly, or spaced too far apart for the span. We set posts to depth in concrete footings, line them properly, and build to the height and style you need. Timber paling remains the most common boundary fence and can be capped and topped for a cleaner finish. Colorbond suits owners who want minimal maintenance and consistent colour. Gates are built to match and hung on hardware that will still swing straight in five years. We can also handle removal and disposal of the old fence, and we work with neighbours on shared boundary fences where required.

Free on-site inspection and fixed written quote
5–10 year warranty on completed work
Fully insured, trained installation crew
Dust-extracted grinding and a clean site at handover

Request a Quote Check Your Suburb

Free on-site quote Indicative pricing

What's Included

What you get with fencing

Specification detail that separates a floor built to last from one that looks fine for a season.

Posts set to depth

Concrete footings at correct depth and spacing — where most fences fail.

Timber or Colorbond

Paling, capped and topped, lapped, or Colorbond in a full colour range.

Matching gates

Single and double gates built to match, on hardware that keeps swinging true.

Removal & disposal

Old fence taken away and the site left clean.

Our Process

How the installation runs

Four clear stages, so you always know what is happening on your floor and when.

Site Measure & Quote

Measure the run, check levels and ground conditions, and issue a fixed written price.

Removal & Set-Out

Old fence removed and disposed of, new line set out and marked.

Posts & Footings

Posts dug, set to depth in concrete, levelled and left to cure.

Panels, Gates & Clean-Up

Rails and palings or sheets fixed, gates hung, site cleared.

Common Questions

Fencing FAQs

Still unsure? Call 0451 980 606 and we will talk it through.

How much does epoxy flooring cost in Melbourne?

Epoxy flooring in Melbourne typically ranges from $55–$85 per square metre for a standard system, with flake systems from $65–$85/m² and metallic finishes from $100–$150/m². Large commercial areas over 500m² attract volume pricing from $30/m². The final figure depends on floor size, concrete condition and the preparation required — which is why every quote follows a free on-site inspection.

How long does epoxy flooring last?

A professionally installed epoxy floor lasts 10–20 years depending on traffic, maintenance and the system installed. The single biggest factor is surface preparation: a floor that was properly diamond-ground will outlast an acid-etched or unprepared one many times over.

How much does metallic epoxy flooring cost in Melbourne?

Metallic epoxy generally costs between $100–$150 per square metre depending on floor preparation, design complexity and floor size.

What is the price of commercial epoxy flooring?

Commercial epoxy flooring usually ranges between $55–$85 per square metre depending on preparation work and coating type. Larger floor areas attract lower per-square-metre rates.

How much does industrial epoxy flooring cost?

Industrial epoxy flooring generally costs between $80–$120 per square metre depending on coating thickness, floor condition and industrial usage requirements.