Commercial epoxy flooring warehouse high gloss Melbourne

Commercial Epoxy Flooring Melbourne

Hard-wearing commercial floors for retail, offices, gyms, showrooms and hospitality — staged around your trading hours.

Get a Free Quote 0451 980 606

$55/m² Standard commercial rate

$30/m² Volume rate over 500m²

After hours Night and weekend installs

5–10 yr Warranty included

Commercial · From $55/m²

Commercial Epoxy Flooring Melbourne done properly

Commercial floors fail for predictable reasons: the wrong system for the traffic, not enough preparation underneath, or a topcoat that cannot take the cleaning regime. We specify commercial epoxy around how the space is actually used — trolleys, foot traffic, spills, wash-down and cleaning chemicals — and stage the install so you keep trading.

Commercial work is priced by area, and the rate drops as the floor gets bigger. A small retail fit-out sits at the top of the range because setup and edge work dominate; a large open floor over 500m² comes down to around $30 per square metre. We quote the whole job as one fixed figure after seeing the site, not a rate that moves once we start.

The bigger variable is almost always the existing floor. Old vinyl, carpet glue, ceramic tiles and previous coatings all have to come off before anything new goes down, and that is where quotes diverge most. We check what is under the current surface at the inspection so removal is priced properly up front rather than appearing as a variation halfway through.

Downtime is usually the real constraint for a trading business. Most commercial floors can be staged in sections, or installed overnight and across weekends, so the space is usable when you open. Fast-cure systems can bring a floor back into service within 24 hours where the schedule demands it — worth specifying early, because it changes the products we order.

Free on-site inspection and fixed written quote
Diamond grinding and moisture testing on every job
Polyaspartic topcoat included as standard
5–10 year warranty, fully insured crew

Request a Quote See Pricing

Warehouse epoxy floor grey gloss black walls

From $55/m² from $30/m² over 500m²

Pricing

Commercial Epoxy Flooring Melbourne cost

Indicative Melbourne pricing. Every job is confirmed with a fixed written quote after a free on-site inspection.

Commercial Epoxy Flooring Melbourne pricing by system type
System	What it includes	Price
Standard commercial	Retail, office, showroom — solid colour or flake	$55 – $75/m²
Heavy-traffic commercial	Gyms, hospitality, high foot traffic	$70 – $95/m²
Decorative / metallic	Showrooms and feature retail spaces	$100 – $160/m²
Large floors (500m²+)	Volume rate for open commercial floor plates	from $30/m²
Add: existing floor removal	Vinyl, carpet glue, tiles or old coatings	from $35/m²

All rates include diamond grinding, primer, build coats and polyaspartic topcoat. Line marking, coving and safety zones quoted separately. Fixed written quote after a free site assessment.

Get an Exact Price

What You Get

Specified for the job, not scaled from a generic system

The detail that separates a floor built to last from one that looks fine for a season.

Retail and showrooms

Decorative finishes that hold up under trolley wheels and constant foot traffic while still looking premium under lighting.

Gyms and studios

Impact-tolerant systems that survive dropped weights, rubber matting and daily chemical cleaning.

Offices and fit-outs

Low-odour, fast-cure options so a tenancy can be handed back on schedule.

Out-of-hours installation

Night and weekend staging so your floor changes without your doors closing.

Slip ratings specified

Anti-slip aggregate matched to the area, with wet zones rated appropriately.

Fixed written scope

One price covering preparation, system and make-good, with no mid-job variations.

Our Process

How the job runs

Four stages, so you always know what is happening on your floor and when.

Site assessment

We inspect the slab, test moisture, identify existing floor coverings and review traffic and cleaning regimes.

Written proposal

A fixed quote with the system specification, staging plan and realistic return-to-service timeline.

Preparation

Existing coverings removed, slab diamond-ground, cracks and joints treated across the full area.

Install and handover

Build coats, topcoat, line marking where required, then final inspection and maintenance guidance.

Common Questions

Commercial Epoxy FAQs

Anything not covered here, call 0451 980 606 and we will talk it through.

How much does commercial epoxy flooring cost in Melbourne?

Standard commercial epoxy runs $55–$75 per square metre, with heavy-traffic environments such as gyms and hospitality at $70–$95/m². Decorative and metallic finishes are $100–$160/m². Large open floors over 500m² attract volume pricing from $30/m². All rates include diamond grinding and a polyaspartic topcoat.

Can you install the floor without closing my business?

Usually, yes. Most commercial floors can be staged in sections or installed overnight and across weekends. Fast-cure systems can return a floor to service within 24 hours where the schedule requires it — tell us the constraint at the quoting stage so we specify the right products.

How long does a commercial epoxy floor last?

Ten to twenty years in a typical commercial environment, depending on traffic and maintenance. The determining factor is preparation: a properly diamond-ground floor with the right topcoat will comfortably outlast a thicker coating applied over an unprepared slab.

Do you remove existing vinyl, carpet glue or tiles?

Yes. Old coverings and adhesive have to come off completely before coating, or the new system bonds to the residue instead of the slab. We check what is under your current floor during the inspection and price removal up front.

Is commercial epoxy slip resistant?

It can be, and it should be specified deliberately. We add anti-slip aggregate at a level matched to the area — heavier in wet zones and entries, lighter in dry retail space where cleanability matters more. Slip resistance built into the system does not wear off the way a surface additive does.

Can you add line marking and safety zones?

Yes. Traffic lanes, pedestrian walkways, hazard zones and bay markings are applied within the coating system rather than painted on top, so they wear at the same rate as the floor instead of scuffing off.