Epoxy Flooring
Seamless, high-strength epoxy flooring engineered for garages, warehouses and commercial spaces that take a beating.
Driveways, shed and house slabs, paths and exposed aggregate — poured, reinforced and finished properly across Melbourne.
GoPoxy pours and finishes concrete across Melbourne — driveways, shed and house slabs, paths, patios and exposed aggregate. The same preparation standards we apply to coatings apply to the concrete underneath them.
Concrete is unforgiving of shortcuts because everything that matters happens before the truck arrives. Base preparation, compaction, formwork, reinforcement placement and joint layout all decide whether a slab performs or cracks. On Melbourne reactive clay soils this matters more than in most cities — the ground moves seasonally, so control joints have to be cut at the right spacing and depth, and reinforcement has to sit at the correct height rather than on the ground. We handle excavation and base preparation, formwork, steel, the pour and the finish. Finishes include broom, trowel, exposed aggregate and coloured concrete. And because we coat floors as our main trade, we can seal or coat the finished slab later without coordinating another contractor.
Specification detail that separates a floor built to last from one that looks fine for a season.
Excavation and compacted base — where slab performance is actually decided.
Mesh and bar set at the right height rather than lying on the ground.
Control joints at correct spacing and depth for Melbourne reactive clay.
Broom, trowel, exposed aggregate and coloured concrete.
Four clear stages, so you always know what is happening on your floor and when.
Levels, access, drainage and soil checked, then a fixed written price.
Area excavated, base compacted, forms set to line and level.
Reinforcement placed and chaired, concrete poured, screeded and finished.
Control joints cut, slab cured, site cleaned and handed over.
Still unsure? Call 0451 980 606 and we will talk it through.
Epoxy flooring in Melbourne typically ranges from $55–$85 per square metre for a standard system, with flake systems from $65–$85/m² and metallic finishes from $100–$150/m². Large commercial areas over 500m² attract volume pricing from $30/m². The final figure depends on floor size, concrete condition and the preparation required — which is why every quote follows a free on-site inspection.
A professionally installed epoxy floor lasts 10–20 years depending on traffic, maintenance and the system installed. The single biggest factor is surface preparation: a floor that was properly diamond-ground will outlast an acid-etched or unprepared one many times over.
Metallic epoxy generally costs between $100–$150 per square metre depending on floor preparation, design complexity and floor size.
Commercial epoxy flooring usually ranges between $55–$85 per square metre depending on preparation work and coating type. Larger floor areas attract lower per-square-metre rates.
Industrial epoxy flooring generally costs between $80–$120 per square metre depending on coating thickness, floor condition and industrial usage requirements.
On-site inspection, fixed price, no obligation.
Seamless, high-strength epoxy flooring engineered for garages, warehouses and commercial spaces that take a beating.
Decorative vinyl flake broadcast into epoxy — textured, slip-resistant and the most popular finish for Melbourne garages.
High-gloss, three-dimensional designer floors with flowing pigment movement. No two installations are ever the same.
Recent concreting installations across Melbourne.
No projects in this category yet.
Book a free on-site inspection and we will measure the area, assess the slab and give you a fixed written quote — no obligation, no pressure.
Scroll to browse · Click image to zoom · Esc to close