Epoxy Resin Flooring Melbourne
Seamless, poured resin floor systems with no joints, no grout lines and nowhere for dirt to hide.
Epoxy Resin Flooring Melbourne
Epoxy resin flooring is a poured, self-levelling system that cures into one continuous surface. With no seams or grout lines, there is nothing to trap dirt, moisture or bacteria — which is why resin floors are the default in spaces where hygiene and cleaning matter as much as durability.
- Free on-site assessment and fixed written quote
- Diamond grinding and moisture testing as standard
- Installation staged around your operating hours
- 5–10 year warranty on completed work
Specified for the environment
Different spaces put different demands on a floor. We build the system around yours.
Fully Seamless
A single continuous surface — no joints, no grout, no weak points.
Chemical Resistant
Stands up to oils, solvents and cleaning chemicals without breaking down.
Hygienic & Easy Clean
Nothing to trap bacteria; mops and scrubbers clear it in one pass.
High Build Strength
Thickness specified to the load the floor actually carries.
Colour Matched
Full colour range including safety zones and line marking.
Fast Return to Service
Staged installation to work around your operating hours.
How a commercial install runs
Site Assessment
We inspect the slab, test moisture, review traffic loads and chemical exposure.
Written Proposal
A fixed quote with the system specification, staging plan and timeline.
Preparation
Diamond grinding, crack repair and joint treatment across the full floor area.
Install & Handover
Build coats, topcoat, line marking where required, then final inspection.
Frequently asked
How much does epoxy flooring cost in Melbourne?
Epoxy flooring in Melbourne typically ranges from $55–$85 per square metre for a standard system, with flake systems from $65–$85/m² and metallic finishes from $100–$150/m². Large commercial areas over 500m² attract volume pricing from $30/m². The final figure depends on floor size, concrete condition and the preparation required — which is why every quote follows a free on-site inspection.
How long does epoxy flooring last?
A professionally installed epoxy floor lasts 10–20 years depending on traffic, maintenance and the system installed. The single biggest factor is surface preparation: a floor that was properly diamond-ground will outlast an acid-etched or unprepared one many times over.
How much does metallic epoxy flooring cost in Melbourne?
Metallic epoxy generally costs between $100–$150 per square metre depending on floor preparation, design complexity and floor size.
What is the price of commercial epoxy flooring?
Commercial epoxy flooring usually ranges between $55–$85 per square metre depending on preparation work and coating type. Larger floor areas attract lower per-square-metre rates.
How much does industrial epoxy flooring cost?
Industrial epoxy flooring generally costs between $80–$120 per square metre depending on coating thickness, floor condition and industrial usage requirements.
What is the cost of flake epoxy flooring?
Flake epoxy flooring generally costs between $65–$85 per square metre depending on floor size and the flake style selected.
Request a Quote
Free site assessment, fixed written price.
Epoxy Resin Flooring Melbourne — recent projects
A look at the finishes we install across Melbourne — garages, warehouses, commercial floors and decorative systems.
No projects in this category yet.
Ready to transform your floor?
Book a free on-site inspection and we will measure the area, assess the slab and give you a fixed written quote — no obligation, no pressure.