Crack repair before epoxy coating applied

Concrete Sealing Services

A protective barrier that reduces porosity and keeps moisture, oil and stains out of your concrete.

From $25/m² · Free Inspection

Professional concrete sealing across Melbourne

Concrete sealing extends the life of a slab by reducing surface porosity and preventing damage from moisture, stains, chemicals and abrasion. It is the low-cost, high-return option when the concrete is sound and you simply want to protect it.

Unsealed concrete absorbs water, oil and contaminants, which leads to discolouration, dusting and early surface deterioration. A correctly applied sealer creates a protective barrier that strengthens the surface while improving how it looks. Depending on the project we can deliver matte, satin or enhanced-finish results — on garages, driveways, warehouse floors, patios and commercial slabs.

Free on-site inspection and fixed written quote
5–10 year warranty on completed work
Fully insured, trained installation crew
Dust-extracted grinding and a clean site at handover

Request a Quote Check Your Suburb

Commercial epoxy floor neat joint detail

From $25/m² Indicative pricing

What's Included

What you get with concrete sealing

Specification detail that separates a floor built to last from one that looks fine for a season.

Moisture protection

Stops water soaking into the slab and causing efflorescence or dusting.

Stain resistance

Oil, grease and chemical spills sit on top instead of soaking in.

Stops concrete dust

Binds the surface so the slab stops shedding fine dust.

Matte, satin or gloss

Finish level selected to suit the space and the slip requirements.

Our Process

How the installation runs

Four clear stages, so you always know what is happening on your floor and when.

Surface Assessment

Checking concrete condition, porosity and moisture.

Cleaning & Prep

Pressure cleaning or grinding where required.

Sealer Application

Even application of the selected sealer system.

Cure & Final Check

Proper drying, then a full finish inspection.

Common Questions

Concrete Sealing FAQs

Still unsure? Call 0451 980 606 and we will talk it through.

Can epoxy flooring be installed over old concrete?

Yes. Old concrete is fine once it has been properly ground back, cracks have been repaired and moisture has been checked. Preparation is what makes it work — the age of the slab matters far less than its condition and how well it is prepared.

Do you provide concrete resurfacing services?

Yes. We provide professional concrete resurfacing for damaged and uneven concrete, either as a finished result or as preparation before an epoxy flooring installation.

Do you provide concrete sealing services?

Yes. We apply concrete sealers to protect surfaces from stains, moisture and long-term damage, with matte, satin or enhanced-finish options.

How much does epoxy flooring cost in Melbourne?

Epoxy flooring in Melbourne typically ranges from $55–$85 per square metre for a standard system, with flake systems from $65–$85/m² and metallic finishes from $100–$150/m². Large commercial areas over 500m² attract volume pricing from $30/m². The final figure depends on floor size, concrete condition and the preparation required — which is why every quote follows a free on-site inspection.

How long does epoxy flooring last?

A professionally installed epoxy floor lasts 10–20 years depending on traffic, maintenance and the system installed. The single biggest factor is surface preparation: a floor that was properly diamond-ground will outlast an acid-etched or unprepared one many times over.