Commercial office epoxy floor glass partitions

Warehouse Epoxy Flooring Perth

Forklift and pallet-jack rated floors with anti-slip aggregate and line marking, installed across Perth warehouses and distribution centres — Canning Vale, Forrestdale, Rockingham, Neerabup and Bibra Lake.

Get a Free Quote 0451 980 606

$65/m² From, plus GST

Forklift Rated for loaded traffic

Staged Zone by zone, no full shutdown

5–10 yr Warranty included

Industrial · From $65/m²

Warehouse Epoxy Flooring Perth done properly

Warehouse epoxy flooring in Perth has to survive punishment nothing else in the building does: loaded forklifts turning on the spot, pallets dropped at dock edges, racking legs concentrating tonnes onto a few square centimetres. Build thickness and preparation are what separate a floor that lasts a decade from one that delaminates in two. We cover Canning Vale, Forrestdale, Rockingham, Neerabup and Bibra Lake, plus the wider Perth metro area.

Build thickness is what separates a warehouse floor from a commercial one. Forklift drive wheels do not just abrade the surface, they apply shear force as they turn, and a coating specified for foot traffic will shear off the slab. Film build is specified against your real traffic rather than a generic rate — the reasoning is in can epoxy flooring handle forklifts and heavy machinery.

Joints and cracks matter more on a large slab, because a large slab moves. Saw-cut control joints are filled with a semi-rigid filler that supports the joint edges against wheel impact instead of being coated straight over, which is what causes edge spalling later.

Surface preparation is the whole job. The top few millimetres of any slab is weak laitance, and some older Perth industrial slabs were poured without an effective vapour barrier, so slab moisture is measured before any system is committed to. Every floor is diamond ground or shot blasted, never acid etched — see diamond grinding vs acid etching and why factory floors fail.

Perth summer heat shortens resin working time, and inside a steel-framed warehouse the slab can sit well above ambient. Large floors are staged in sections so your operation keeps running, planned around racking moves, stock movement and the time of day the slab is coolest. More on timing in commercial epoxy flooring in Perth.

Our core Perth industrial areas are Canning Vale, Forrestdale, Rockingham, Neerabup and Bibra Lake, covering the Bannister Road estates, the Perth Markets precinct and the surrounding trade and logistics units. We also work across Kewdale, Welshpool, Malaga, Osborne Park, Wangara, Jandakot and Henderson. Pricing for every Perth job is set out in commercial epoxy flooring prices in Perth, and we also offer concrete sealing for lower-duty storage areas.

Request a Quote See Pricing

Commercial epoxy floor neat joint detail

From $65/m² plus GST, supplied and installed

Free on-site inspection and fixed written quote
Diamond grinding and moisture testing on every job
Polyaspartic topcoat included as standard
5–10 year warranty, fully insured crew

Areas we serve

Warehouse epoxy flooring across Perth

Our core Perth industrial areas, covering the Bannister Road estates, the Perth Markets precinct and the surrounding trade and logistics units.

Canning Vale
Forrestdale
Rockingham
Neerabup
Bibra Lake
Kewdale
Welshpool
Malaga
Osborne Park
Wangara
Jandakot
Henderson
Naval Base
Hazelmere
High Wycombe
Bayswater
Bassendean
Maddington
Landsdale
Balcatta

Pricing

Warehouse Epoxy Flooring Perth cost

Indicative Perth pricing. Every job is confirmed with a fixed written quote after a free on-site inspection.

Warehouse Epoxy Flooring Perth pricing by system type
System	What it includes	Price
Standard warehouse	Heavy-duty epoxy, anti-slip aggregate, polyaspartic seal	from $65/m²
Heavy-duty industrial	Increased film build for constant loaded forklift traffic	quoted on site
Large floor plates	Volume rate across open warehouse areas	quoted on site
Line marking	Traffic lanes, walkways, bays and hazard zones	quoted per lineal m
Joint treatment	Semi-rigid filler supporting joint edges against impact	quoted per lineal m

All rates exclude GST and include diamond grinding, primer, high-build epoxy and topcoat. The larger the floor area, the better the rate per square metre, because mobilisation and setup spread further. Slab condition is the biggest variable and is assessed before the price is fixed in writing.

Get an Exact Price

What You Get

Specified for the job, not scaled from a generic system

The detail that separates a floor built to last from one that looks fine for a season.

Forklift rated

Film build specified to your real traffic, so turning drive wheels do not shear the coating off the slab.

Diamond ground, always

Mechanical preparation with dust extraction. Never acid etching, which cannot remove oil contamination.

Moisture tested first

Slab moisture measured before coating — older Perth industrial slabs often lack an effective vapour barrier.

Staged installation

Worked in sections around racking and stock movement so the facility keeps operating.

Line marking included

Traffic lanes, pedestrian walkways and hazard zones applied within the system after cure.

Fixed price in writing

Site inspection first, then one scope and one price. Insurance and SWMS supplied for induction.

Our Process

How the job runs

Four stages, so you always know what is happening on your floor and when.

Site inspection

We measure the floor, test slab moisture, review forklift traffic, racking layout, joint condition and your operating hours.

Staging plan

A written quote with the system spec and a section-by-section plan built around your operation, with return-to-service times per area.

Preparation

Diamond grinding across each section with dust extraction, crack repair and semi-rigid joint filling.

Coat, mark, hand over

High-build epoxy, anti-slip topcoat, line marking, then inspection and zone-by-zone return to service.

Common Questions

Warehouse Epoxy Perth FAQs

Anything not covered here, call 0451 980 606 and we will talk it through.

How much does warehouse epoxy flooring cost in Perth?

From $65 per square metre plus GST, supplied and installed, including diamond grinding, primer, high-build epoxy and topcoat. Larger floor plates price better per square metre. Slab condition is the biggest variable — existing coatings, oil contamination or spalling all add remediation, which is assessed before the price is fixed.

Will the floor handle forklifts and pallet jacks?

Yes, when it is specified for it. Forklift drive wheels apply shear force as they turn, not just abrasion, so film build is matched to your real traffic and wheel type. A floor specified for storage duty will not survive a main travel lane.

Do you need to shut the warehouse down?

No. Floors are staged in sections around racking and stock movement, or run after hours and across weekends. The quote states return-to-service times per area rather than one duration for the whole building.

How long before forklifts can run on the new floor?

Foot traffic after roughly 24 hours and vehicle traffic after roughly 72. Cure times cannot be compressed, so they are built into the staging plan.

How are control and expansion joints handled?

Filled with a semi-rigid filler that supports the joint edges against wheel impact. Coating straight over a moving joint is what causes edge spalling and cracking later.

Which Perth areas do you cover?

All Perth metropolitan industrial areas, including Canning Vale, Forrestdale, Rockingham, Neerabup and Bibra Lake, plus Kewdale, Welshpool, Malaga, Osborne Park, Wangara, Jandakot and Henderson.