Double garage epoxy floor light silver flake

Factory Epoxy Flooring Perth

Chemical-resistant, wash-down and anti-slip production floors for Perth factories and processing plants — Canning Vale, Forrestdale, Rockingham, Neerabup and Bibra Lake.

Get a Free Quote 0451 980 606

$65/m² From, plus GST

Chemical Resistant to process spills

Thermal Handles wash-down and hot work

5–10 yr Warranty included

Industrial · From $65/m²

Factory Epoxy Flooring Perth done properly

Factory epoxy flooring in Perth has to survive things a warehouse floor never meets: process chemicals, hot wash-down, machinery vibration and thermal cycling, often in the same building on the same shift. A floor specified on area alone will fail in the wettest, hottest or most chemically loaded zone first.

Chemical exposure drives the specification. Standard epoxy resists a great deal, but oils, coolants, acids, caustics and solvents each attack resin differently. The products actually used on your floor determine the system, which is why the inspection asks what gets spilled rather than assuming.

Zones matter more than buildings. A packing area, a dosing station and a wash bay need three different systems even under one roof. Specifying a single floor across a whole plant is how one zone fails years before the rest and takes the whole programme with it.

Thermal cycling is the quiet killer in food and process plants. Hot wash-down onto a cold slab makes the coating and the concrete expand at different rates, and a system not built for it debonds at the edges. Where that happens, the build and the primer both change.

Anti-slip is a safety requirement, not a finish option. Wet process floors need a measured grip level, achieved with graded aggregate in the topcoat. Coving at the wall junction stops fluid collecting where a 90-degree corner would trap it — essential in food production and anywhere subject to audit.

Surface preparation decides whether any of it lasts. Every floor is diamond ground or shot blasted with dust extraction, never acid etched, and the slab is moisture tested first — see diamond grinding vs acid etching and why factory floors fail. Work is staged zone by zone so production keeps running.

Request a Quote See Pricing

Metallic epoxy floor pigment movement detail

From $65/m² plus GST, chemical-resistant systems

Free on-site inspection and fixed written quote
Diamond grinding and moisture testing on every job
Polyaspartic topcoat included as standard
5–10 year warranty, fully insured crew

Areas we serve

Factory epoxy flooring across Perth

Our core Perth industrial areas, covering the Bannister Road estates, the Perth Markets precinct and the surrounding processing and manufacturing units.

Canning Vale
Forrestdale
Rockingham
Neerabup
Bibra Lake
Kewdale
Welshpool
Malaga
Osborne Park
Wangara
Jandakot
Henderson
Naval Base
Hazelmere
High Wycombe
Bayswater
Bassendean
Maddington
Landsdale
Balcatta

Pricing

Factory Epoxy Flooring Perth cost

Indicative Perth pricing. Every job is confirmed with a fixed written quote after a free on-site inspection.

Factory Epoxy Flooring Perth pricing by system type
System	What it includes	Price
Standard factory floor	Chemical-resistant epoxy with anti-slip topcoat	from $65/m²
Heavy-duty process area	Increased build for machinery loads and constant wash-down	quoted on site
Wash-down and food zones	Coving, graded anti-slip aggregate, hygienic detailing	quoted on site
Line marking	Traffic lanes, walkways, bays and hazard zones	quoted per lineal m
Joint treatment	Semi-rigid filler supporting joint edges against impact	quoted per lineal m

All rates exclude GST and include diamond grinding, primer, high-build epoxy and topcoat. Chemical exposure, wash-down and thermal conditions move the specification, so the system is confirmed after a site inspection and then fixed in writing.

Get an Exact Price

What You Get

Specified for the job, not scaled from a generic system

The detail that separates a floor built to last from one that looks fine for a season.

Chemical resistant

Resin and topcoat matched to the products actually handled on your floor, not a generic industrial spec.

Thermal shock rated

Systems built for hot wash-down onto a cold slab, where a standard build would debond at the edges.

Wash-down ready

Coving at the wall junction and falls respected, so fluid runs to drain instead of collecting in corners.

Measured anti-slip

Graded aggregate in the topcoat to a stated grip level, rather than a finish chosen by eye.

Zoned specification

Packing, dosing and wash areas specified separately, because one system across a plant always fails somewhere.

Staged around shifts

Worked zone by zone or across shutdowns so production continues, with return-to-service times per area.

Our Process

How the job runs

Four stages, so you always know what is happening on your floor and when.

Site inspection

We walk each zone, test slab moisture, identify chemical exposure, wash-down regimes, thermal conditions and machinery loads.

Zoned specification

A written quote specifying each area separately, with a staged programme built around your shifts and shutdowns.

Preparation

Diamond grinding or shot blasting with dust extraction, decontamination, crack repair and semi-rigid joint filling.

Coat, detail, hand over

Primer, high-build epoxy, coving and anti-slip topcoat, then line marking, inspection and zone-by-zone return to service.

Common Questions

Factory Epoxy Perth FAQs

Anything not covered here, call 0451 980 606 and we will talk it through.

How much does factory epoxy flooring cost in Perth?

From $65 per square metre plus GST, supplied and installed, including diamond grinding, primer, high-build epoxy and an anti-slip topcoat. Chemical exposure, wash-down requirements and thermal conditions move the specification, so the figure is confirmed after a site inspection and fixed in writing.

Will the floor resist our process chemicals?

If it is specified for them. Oils, coolants, acids, caustics and solvents each attack resin differently, so we ask what is actually handled on the floor and match the resin and topcoat to it rather than applying a generic industrial system.

Can different areas of the plant have different systems?

Yes, and they usually should. A packing area, a dosing station and a wash bay have different demands. Specifying one floor across an entire plant is the most common reason a single zone fails years before the rest.

Do you handle hot wash-down areas?

Yes. Hot water onto a cold slab causes the coating and concrete to move at different rates, so thermal cycling areas get a different build and primer. Without that, the system debonds at the edges.

Is anti-slip included?

Graded aggregate is added to the topcoat to reach a stated grip level wherever floors get wet. For food production and audited sites we also install coving so the wall junction does not trap fluid.

Can production keep running during the work?

Usually yes. Factory floors are staged zone by zone or run across planned shutdowns and weekends, with return-to-service times stated per area rather than one duration for the building.