01

02

1

The multi-colour nature of flake epoxy flooring is its practical superpower. Tyre marks, oil drips, dust, and grit simply disappear into the pattern — making your Melbourne garage floor look clean even when it is not. Single-colour solid epoxy shows every mark and scuff. Bare concrete absorbs stains permanently. Flake epoxy makes maintenance effortless.

2

The vinyl chip surface of a flake epoxy garage floor creates a naturally textured, anti-slip finish. Unlike smooth solid-colour or metallic epoxy systems that can be slippery when wet, flake epoxy provides excellent traction in wet Melbourne weather — particularly important when washing the car or during heavy rain. Safety is built in, not added on.

3

A professionally installed flake epoxy garage floor in Melbourne from GoPoxy — using commercial-grade materials and diamond grinding surface preparation — consistently lasts 10 to 15 years in residential garage conditions. Vehicle traffic, tools being dropped, chemical spills — flake epoxy handles it all without complaint. This is dramatically longer than paint (1 to 2 years) or cheap epoxy kits (12 to 18 months).

4

GoPoxy offers an extensive range of vinyl chip colour combinations — from classic neutral blends of grey, white, and black to warm earthy tones, bold modern palettes, and custom mixes. Melbourne homeowners can select a combination that perfectly complements their home exterior, interior style, or personal preference. No two flake epoxy garages need look the same.

5

The sealed, seamless surface of a flake epoxy garage floor is one of the easiest surfaces to clean in any Melbourne home. A quick sweep removes loose debris. A mop with warm water and a mild cleaner takes care of the rest. No scrubbing grout lines, no special treatments, no re-sealing required. Most Melbourne homeowners clean their flake epoxy garage floor in less than 10 minutes.

6

Melbourne real estate agents consistently highlight a professionally finished garage as one of the top factors that positively influence buyer perception during property inspections. A flake epoxy garage floor signals quality, care, and attention to detail throughout the property. For the investment involved, it is one of the highest-return improvements a Melbourne homeowner can make before selling.

7

One of the biggest practical advantages of flake epoxy flooring for Melbourne homeowners is the installation speed. Most standard single and double garages are completed in a single day — including diamond grinding, primer, epoxy base coat, flake broadcast, and polyurethane topcoat. You can be back using your garage within 24 to 72 hours of installation completing.

8

The polyurethane topcoat on a GoPoxy flake epoxy garage floor provides excellent resistance to oil, fuel, brake fluid, degreasers, and cleaning chemicals. Spills can be wiped up quickly without staining the floor — something bare concrete can never offer. For Melbourne car enthusiasts and home mechanics, this is a non-negotiable feature.

9

Melbourne homeowners increasingly use their garages as multi-purpose spaces — workshops, gyms, hobby rooms, entertainment areas, and home offices. A flake epoxy garage floor transforms a grimy concrete slab into a clean, professional-looking space that is comfortable to spend time in. The difference in the overall feel of the garage is immediate and dramatic.

10

At $65 to $85 per m² installed, flake epoxy flooring delivers exceptional value compared to alternatives. Polished concrete costs significantly more. Quality tiles with professional installation cost more — and have grout lines to maintain. Timber is unsuitable for garage environments. Flake epoxy delivers the best combination of performance, aesthetics, and value for any Melbourne garage floor.

03

04

🚗

Single Garage (~30m²)

$1,950

–$2,550 total

🚗🚗

Double Garage (~55m²)

$3,575

–$4,675 total

🚗🚗🚗

Triple Garage (~75m²)

$4,875

–$6,375 total

🏢

Commercial (~200m²)

$13,000

–$17,000 total

✅ Diamond grinding preparation

✅ Commercial-grade primer coat

✅ 100% solids epoxy base coat

✅ Full flake broadcast

✅ Grout coat over flakes

✅ UV-stable polyurethane topcoat

✅ Anti-slip aggregate included

✅ Clean up and waste removal

✅ Written warranty

05

🚗

Residential Garages

🔧

Home Workshops

🏋️

Home Gyms

🏭

Commercial Workshops

🏢

Commercial Spaces

🌿

Alfresco & Outdoor Areas

06

07

GoPoxy installs flake epoxy flooring at $65 to $85 per m² across Melbourne. A single garage (30m²) costs approximately $1,950 to $2,550. A standard double garage (55m²) costs approximately $3,575 to $4,675. A triple garage (75m²) costs approximately $4,875 to $6,375. These prices include diamond grinding, all coats, polyurethane topcoat, and clean up. Book a free site visit for your exact Melbourne quote.

A professionally installed GoPoxy flake epoxy garage floor in Melbourne lasts 10 to 15 years with normal residential use. The key factors are the quality of diamond grinding preparation, the quality of epoxy products, and maintenance. GoPoxy uses commercial-grade 100% solids epoxy systems and performs diamond grinding on every job — which is why our flake epoxy floors consistently deliver results at the longer end of this range.

No — flake epoxy is naturally anti-slip. The vinyl chip surface creates an inherent texture that provides excellent traction even when wet. This is one of the key reasons flake epoxy is the preferred garage floor system across Melbourne — particularly in areas exposed to rain, car washing, or wet footwear. Additional anti-slip aggregate can also be added to the topcoat for extra grip if required.

Most Melbourne single and double garages are completed in a single day. A triple garage or larger area may take 2 days. Light foot traffic is safe within 24 hours of completion. Vehicle use is safe after 72 hours. Full chemical cure is achieved at 7 days. GoPoxy also offers weekend installations across Melbourne to minimise disruption to your routine.

Absolutely — GoPoxy offers over 50 flake colour combinations for Melbourne garages. Popular choices include classic grey/white/black blends, warm beige and tan tones, earthy naturals, and bold custom mixes. During your free site visit, our specialist will bring colour samples so you can choose the combination that best suits your home and personal style. The colour is entirely your choice.

GoPoxy installs flake epoxy garage flooring across all Melbourne suburbs — from premium inner suburbs including Toorak, Malvern, Kew, and Balwyn, to outer growth areas including Craigieburn, Mickleham, Melton, Tarneit, and Werribee, to eastern and southern suburbs including Frankston, Knox, Ringwood, and Dandenong. We also service Sydney, Perth, and Adelaide. Check our Google Business profile for service area confirmation.

Flake epoxy floors are extremely easy to maintain. Sweep or blow out weekly to remove grit. Mop with warm water and a mild pH-neutral cleaner monthly. Clean up oil, fuel, and chemical spills promptly. Avoid harsh acidic cleaners. Place rubber mats under vehicle tyres if parking in the same spot for extended periods to prevent tyre plasticiser marks. A maintenance topcoat every 7 to 10 years keeps the floor looking brand new indefinitely.

For most Melbourne garages — yes. Flake epoxy is naturally anti-slip (solid colour is not), hides tyre marks and dirt far better, and looks more interesting than a plain single colour. Solid colour epoxy is a cost-effective option for smaller budgets but shows every scuff and requires more frequent cleaning to maintain appearance. GoPoxy recommends flake epoxy to the vast majority of Melbourne homeowners for these practical advantages.

Yes — in most cases. Flake epoxy can be applied to any structurally sound concrete garage floor. If there is an existing paint or sealer coating it must be fully removed by diamond grinding. If there are tiles, professional tile removal is required first — GoPoxy offers this service. If there is significant cracking or damage, our concrete resurfacing service restores the slab before flake epoxy is applied. All of this is assessed at the free site visit.

Yes — consistently. Melbourne real estate agents report that a professionally finished epoxy garage floor is one of the most positively commented-on features during property inspections. A flake epoxy garage immediately signals quality and care throughout the home — a powerful subliminal message to potential buyers. For the investment involved, flake epoxy garage flooring delivers one of the highest returns of any home improvement project in Melbourne.