We are based in Mickleham. Not "servicing Mickleham" from an office somewhere else — our workshop is here in 3064, which is why inspections in this postcode are usually same-week and often same-day. Here is everything worth knowing about epoxy flooring in Mickleham, from what it costs to why a brand-new estate slab still needs grinding.
The short answer
Epoxy flooring in Mickleham starts from $1,400 for a single garage and $2,400 for a double, complete. Mickleham is almost entirely recent estate construction, so slabs are flat, clean and free of old coatings — which keeps preparation time down. They still carry a builder's sealer applied at handover that has to be diamond ground off before anything will bond.
Why being local actually matters
Plenty of companies list Mickleham among forty suburbs on a service page. We live here.
Three practical differences come out of that:
- Speed. A Mickleham inspection is usually same-week and frequently same-day, because it is a ten-minute drive rather than a scheduled trip across the city.
- We know the builders. Mickleham estates are built by a relatively small group of volume builders, and we have ground hundreds of their slabs. We know which ones seal heavily, which leave render on the floor, and what to expect before we arrive.
- We are still here afterwards. If something needs looking at in two years, we are down the road. That is a different proposition from a contractor who travelled an hour to do your garage once.
Our Mickleham service page covers the area detail; this guide is the longer version.
What makes a Mickleham slab different
Almost everything in Mickleham is recent estate construction — Merrifield, Annadale, Botanical and the surrounding releases. For a floor coater that is close to ideal.
What works in your favour:
- Slabs are flat and well finished, poured to modern standards
- No existing coating to strip — the single biggest variable on an older garage
- No decades of oil soaked into porous concrete
- Minimal structural cracking, because the slab is young
Because preparation is the largest cost in any epoxy job, clean young slabs mean most Mickleham garages sit at the lower end of the price range and run exactly to plan.
What still needs doing:
The builder's sealer
This catches out nearly every new-build owner. Builders apply a sealer to garage slabs at handover as standard. It is invisible. And it is formulated specifically to stop things bonding to concrete — exactly the opposite of what a coating needs.
It has to come off mechanically. Along with it goes the paint splatter, plaster droppings and render that every build leaves behind. A diamond grinder removes the lot in one pass and leaves an open profile the coating can key into. Acid etching cannot get through a sealer at all — the full comparison is in diamond grinding vs acid etching.
Moisture
Young concrete holds water from curing. Water moving up through a slab lifts a coating from underneath regardless of how well the surface was prepared, which is why we moisture test before quoting rather than after starting. A high reading means a moisture-barrier primer, priced up front.
Seasonal movement
The northern corridor sits on reactive clay that swells through winter and shrinks through summer, so fine hairline cracking on young slabs is normal. It is entirely manageable — cracks are routed into a clean channel, filled with a structural repair compound and ground flush before priming, never coated over.
Garage floors in Mickleham
Single garage epoxy flooring in Mickleham
Around 18m², from $1,400 complete. Two days on site with the same full system as any larger floor — nothing gets shortened because the space is smaller. See single garage epoxy flooring.
Double garage epoxy flooring in Mickleham
Around 36m², from $2,400 complete, and by far our most common job in this postcode. Most are new-build garages coated before the owners move in. See double garage epoxy flooring.
Triple garages and sheds
Quoted on measure. A triple still takes two days and works out cheaper per square metre, because masking, setup and mobilisation are largely fixed costs in time rather than area.
Which finish?
| System | From | Best for |
|---|---|---|
| Flake epoxy | $65/m² | Working garages — hides tyre marks and dust, textured grip |
| Solid colour epoxy | $55/m² | Sheds, workshops, utility spaces |
| Metallic epoxy | $100/m² | Display spaces, converted garages, interiors |
| Concrete sealing | $25/m² | Driveways and paths |
| Concrete resurfacing | $45/m² | Tired or damaged concrete |
| Tile removal | $35/m² | Before an interior floor goes down |
Flake wins in Mickleham, and not by a small margin. Charcoal with a black, white and grey blend hides tyre marks and garage dust far better than a light or solid floor, and the flake texture gives useful grip. The handful of owners who choose solid gloss generally have a garage that functions as a finished space rather than a working one.
The two days
Day one is preparation — and it is the day that decides the result. Masking to roughly 300mm, diamond grinding with industrial dust extraction, edge grinding around the perimeter where the main machine cannot reach, cracks routed and filled, slab vacuumed, then primer late in the day to cure overnight.
The dust extraction matters more than people expect. A garage has an internal door into the house, and grinding without extraction sends fine concrete dust straight through it.
Day two is the finish. Coloured base coat rolled out, flake broadcast to refusal — thrown until the surface will not take any more — then scraped back, vacuumed, and sealed under a clear polyaspartic topcoat.
Then it cures: walk on it at 24 hours, storage back at 48, park a car at 72. Full detail in how long epoxy flooring takes.
New build? Do it before you move in
Most of our Mickleham work is new-build garages coated in the window between handover and moving in, and it is comfortably the best time to do it.
- The garage is empty — nothing to shift, nothing to store elsewhere
- No car to relocate for three days
- If the driveway is not poured yet, we can reach the front slab edge and carry the coating over it properly instead of stopping at a raw lip
That edge is what the street sees every time the door goes up. Left bare it stays grey and chips at the corner.
Commercial and industrial work in the northern corridor
Mickleham sits alongside a growing industrial belt, and we quote a steady stream of commercial floors across the north — Craigieburn, Campbellfield, Somerton, Thomastown and Broadmeadows.
- Warehouse epoxy flooring — forklift traffic, racking, line marking
- Factory epoxy flooring — chemical exposure, heavy plant, washdown
- Commercial epoxy flooring — retail, showrooms, workshops
Commercial floors are always quoted on site, because traffic type, chemical exposure and how much downtime you can afford all change the specification. Most are staged so the business keeps operating.
Our other services in Mickleham
We have expanded beyond flooring, and for a new-build home in Mickleham that often means one contractor rather than four:
- Concreting — driveways, paths and slabs, which on a new estate home are frequently still to be done
- Fencing — boundary fencing, common on handover blocks where only the builder's temporary fencing exists
- Landscaping — turf, paving, retaining and drainage on bare estate blocks
- Residential painting — interiors and exteriors
- Hybrid flooring — waterproof timber-look floors through living areas
Sequencing is the real benefit. Driveway before landscaping, fencing before paving, garage floor before the shelving goes in — decisions that only get made properly when one party is planning the whole thing.
Neighbours booking together
Something that happens here more than anywhere else we work: one garage gets coated, the neighbours see it, and we end up quoting three houses in the same street.
Grouped bookings genuinely cost us less — one trip, one setup, materials ordered together — and we pass that on. If two or three of you want floors done in the same week, say so when you enquire and we will price it as a group.
Around Mickleham
Same team, same pricing, no travel charge: Kalkallo, Donnybrook, Craigieburn, Greenvale, Beveridge, Wollert, Epping and the rest of the northern corridor — plus all of metropolitan Melbourne. Broader pricing in how much epoxy flooring costs in Melbourne.
Frequently asked questions
How much does epoxy flooring in Mickleham cost?
From $1,400 for a single garage and from $2,400 for a standard double, complete. Larger areas are priced per square metre — from $55/m² solid colour, $65/m² flake and $100/m² metallic. Mickleham slabs are generally new and in good condition, which keeps preparation time down and puts most jobs at the lower end of the range.
Are you actually based in Mickleham?
Yes. Mickleham 3064 is home, not a service area added to a list. It means inspections here are usually same-week and often same-day, and if something needs looking at after the job we are ten minutes away rather than across town.
Why are Mickleham garage slabs easy to work with?
Almost everything here is recent estate construction, so slabs are flat, clean, free of old coatings and have no decades of oil soaked into them. That is the ideal starting point for a coating, and it is why jobs here usually run exactly to plan.
If the slab is new, why does it still need grinding?
Because a new slab is not a bare slab. Builders seal garage floors at handover, and that sealer is invisible and specifically formulated to stop things bonding to concrete. It has to be ground off mechanically, along with any paint, plaster or render left from the build.
Do you moisture test new Mickleham slabs?
Always, before quoting. Young concrete holds water from curing, and moisture rising through a slab lifts a coating from underneath no matter how well the surface was prepared. The test takes twenty minutes and removes the single biggest risk.
What is the best finish for a double garage in Mickleham?
Flake, in the great majority of cases. Charcoal with a black, white and grey blend hides tyre marks and garage dust far better than a solid colour, and the texture gives useful grip. Solid colour gloss suits garages being used as finished spaces rather than working ones.
How long does a double garage take?
Two days on site. Day one is masking, diamond grinding with dust extraction, crack repair and primer, which cures overnight. Day two is the coloured base coat, flake broadcast, scrape-back and the clear polyaspartic topcoat.
When can I park on it?
Walk on it after 24 hours, move storage back after 48, park a car after 72. Those timings stretch in cold weather and we tell you the realistic figures for the week you are booked.
Should I do it before I move into my new home?
If you can, yes. The garage is empty, nothing has to be shifted, there is no car to relocate for three days, and if the driveway has not been poured we can finish the front slab edge properly. It is the easiest window you will get.
Do you coat the front edge of the slab?
Yes. That edge is what the street sees every time the door goes up, and left raw it stays grey and chips at the corner. Carrying the coating over it gives a finished line instead of a cut-off one.
Can neighbours book together?
Yes, and in Mickleham estates it happens regularly — one garage gets done and two more on the street follow. Grouped bookings save us travel and setup and we pass that on, so mention it when you enquire.
Do you do single garages as well as doubles?
Yes. A single garage is around 18m² and takes the same two days, with the same preparation. Nothing is shortened because the space is smaller.
What about triple garages and larger sheds?
Both are straightforward and quoted on measure. A triple garage still takes two days and works out cheaper per square metre, because masking, setup and mobilisation are largely fixed costs.
Do you do commercial work in Mickleham?
Yes — warehouse, factory, workshop and retail floors across the northern corridor, including the industrial areas around Craigieburn, Campbellfield and Somerton. Commercial floors are quoted on site because traffic, chemicals and downtime all change the specification.
Will hot tyres damage the floor?
Not with a polyaspartic topcoat, which is what we finish every floor with. Hot tyre pickup is a failure mode of cheap single-part coatings and hardware-store kits.
How much dust does the grinding make?
Very little. The grinder runs coupled to an industrial dust extractor and walls are masked before anything starts. Grinding without extraction sends fine concrete dust through the internal door into the house.
Is flake epoxy slippery?
The flake gives the surface texture, so it grips better than smooth gloss. Any hard floor is slick with water on it, and for areas that get regularly wet we can add an anti-slip aggregate to the topcoat.
How long will the floor last?
Fifteen years or more in a domestic garage, backed by a written workmanship warranty. Floors that fail early failed at preparation rather than wearing out.
Which suburbs around Mickleham do you cover?
Kalkallo, Donnybrook, Craigieburn, Greenvale, Beveridge, Wollert, Epping and the rest of the northern corridor, along with all of metropolitan Melbourne.
Is the quote free?
Yes. The on-site measure costs nothing and carries no obligation. We assess the slab, moisture test it, talk through colours and leave you with a fixed written price.
Book a measure — we are local
We have been coating floors from Mickleham since 2020, with more than 2,000 completed across Melbourne. Every floor is diamond ground with dust extraction, moisture tested before quoting, and backed by a written workmanship warranty.
In this postcode we can usually look at your slab within the week. The measure is free and there is no obligation.
Call 0451 980 606 or book a free on-site measure.
See our work
- Google Business Profile — reviews and completed jobs
- Facebook — recent projects
- Instagram — install days and finishes
Planning an epoxy floor in Melbourne?
Book a free on-site inspection and get a fixed written quote — no obligation.
